Raimondi 1mm RLS VITE Level Clips (3000 pcs)
R.L.S. VITE is the new levelling system in the Raimondi range. Insert the cap into clip threat and with just two fingers twist it down: it reaches the tile in a second. Then tight the cap to level the tiles.
- Clips creates a nominal joint of 1 mm (1/32”).
- For tiles thickness from 3 to 15 mm (1/8”-19/32”).
- Caps not Included.
- Levelling system made up of cap and clips.
- Insert the cap in the clip threat and with just to fingers twist it down by acting on the grip point: it reaches the tile in a second (“spinning top” effect).
- Then tight the cap so to level the tiles (remove lippages).
- Once the adhesive is set, remove the cap by beating it with a white rubber mallet (or with the foot). Beat parallel to the joint line. As an alternative, unscrew the cap, remove it and beat directly on the clip (parallel to the joint line).
- The cap is designed to provide maximum ergonomics and finger grips both for starting cap rotation on the clip and for applying the necessary force for levelling tiles (lippage removal) with ease.
- The cap hollow-design allows the user to see the grout joint. This makes it suitable to be use both on tiles sides and intersections.
- R.L.S. VITE does not require any tools.
|Leveling Systems & Spacers : Type||Leveling Systems|
Write Your Own Review